DURALUM DA-5000 Rivet panel
- MaterialAluminum Panel
- Joint width15.9mm (5/8")
- ScrewingNot Visible
- Aspects/featuresCustom system depth
Possibility of joint conver (Fillers)
Product cost $$
Product cost $$$
Volumetry (3D Shapes)
- Material thickness(Alu) 3.2mm (1/8")
- System depth50.8mm (2")
- Installation sequenceSequential (Interlocking)
The DA-5000 is actually exactly the same assembly as the FC-100 system. The only difference is that the DA-5000 is assembled from a raw aluminum sheet and the FC-100 is assembled from a composite aluminum sheet. This product was therefore developed mainly to be compatible with our FC-100 system.
The system consists of a 1″ aluminum sheet folded over the entire perimeter of the panel in order to be fixed to an aluminum extrusion with rivets. Perimeter extrusions are designed so that they can slide movable fasteners and also allow to slide a joint cover into it to hide the fasteners. The joint widths of 5/8″ are invariable, whereas the minimum relief of the system is 2″.
This system makes it easy to add volume to the panels and to have a variable panel depth. The DA-5000 will be slightly more expensive than the DA-1000 system, but will have the advantage of having no visible screws.